The Wakaba and Kareha support thread, part 2 (1000)
1 Name: !WAHa.06x36 : 2007-10-11 06:19 ID:K4vOYfq0
This thread is for all your simple questions about installing and running Wakaba or Kareha, that just require quick answers. Please don't create new threads for issues like that, post them in here instead.
Before posting, check that the question has not already been answered in this thread, or in the previous thread: http://wakaba.c3.cx/sup/kareha.pl/1141929669/
Questions about "500 Internal Server Errors" go in this thread: http://wakaba.c3.cx/sup/kareha.pl/1109033191/
301 Name: ASef4h5j6k6l : 2008-06-06 14:03 ID:fzQTe07X
I've uninstalled mod_perl, it still comes up with the error.
302 Name: ASef4h5j6k6l : 2008-06-07 08:58 ID:fzQTe07X
Problem solved, I added:
ScriptAlias /cgi-bin/ /var/www/html/
<Directory "/var/www/html/">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
AddHandler cgi-script .pl
Order allow,deny
Allow from all
</Directory> to /etc/apache2/sites-available/default
and this:
AddHandler cgi-script .cgi .pl
to apache.conf
and loaded the module using:
sudo a2enmod perl
I then restarted Apache and hey presto! the wakaba.pl script loaded up!
I think the source of the problem was not adding the code to /sites-available/default as this defines /var/www/html/wakaba as a directory that can run perl.
303 Name: Anonymous : 2008-06-07 22:08 ID:kJqIM+0e
>>286
this has been done along with overhauling the mod panel to something sane
304 Name: Anonymous : 2008-06-08 06:20 ID:Heaven
Regarding the "KEEP_MAINPAGE_NEWLINE" thing again.
Is there any way to make it works when viewing threads?
I have tried to do like this:
>},1;
at the end of THREAD_HEAD_TEMPLATE but when I try to post again it just output:
><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
instead of the comment. Is there any way to do this?
305 Name: !WAHa.06x36 : 2008-06-08 07:48 ID:Heaven
> Is there any way to make it works when viewing threads?
In Kareha? No. The script finds threads by loading single specific lines from the file. Everything breaks if you mess with that.
307 Name: Anonymous : 2008-06-11 22:11 ID:hhQp7lKX
Two simple queries:
Am I correct in thinking that of Wakaba, Kareha and Kusaba, only Kareha can have dynamically generated 2ch style "show last 50 posts" (eg http://wakaba.c3.cx/sup/kareha.pl/1192108766/50)? I was looking to integrate most recent posts embedded into other parts of the site using this feature, so it seems only Kareha will do using this method.
Particularly in Kareha, is there a simple way of flagging a thread undeletable, so it could be left alone at the end of the board without any danger of it being deleted? I was looking to tie certain threads into the site, so I don't want them being deleted.
Thanks.
308 Name: Anonymous : 2008-06-12 04:38 ID:Heaven
>>307
IIRC Kusaba had "first 100" and "last 50" links in that giant mess of useless buttons it adds to every thread. You can do something similar with Wakaba when it's rebuilding the thread page -- just prune the thread after writing the res/*.html file, and run the writer again with a new filename. You'd have to be fairly competent with Perl to hack that in, though.
If you're intending to mix threads in with non-thread content, I think it'd probably be easiest to use Wakaba and pull the threads with an SQL query elsewhere.
309 Name: Anonymous : 2008-06-13 06:20 ID:hhQp7lKX
>>308
Thanks, I more or less got something working.
Last problem I have is adapting the output to fixed width - for some reason a long line of text in a thread refuses to wrap to a new line (which screws up the display) despite me plastering max-width everywhere in the CSS, I presume I am missing the proper location for max-width in the CSS or style.pl? The page itself is now fixed width, but a long line just doesn't wrap fluidly like it should. The element is a blockquote, but the CSS does nothing to stop the line...
Last piece in the puzzle for me now...
310 Name: Anonymous : 2008-06-16 16:01 ID:QViPFfeE
How do you change the "Wakaba image board" title and link "Home" to a specific page?
311 Name: Anonymous : 2008-06-16 16:29 ID:QViPFfeE
Ok, I've gotten the "home" link sorted out myself, but I can't figure out how to change the "Wakaba image board" title on the first page.
313 Name: kyle : 2008-06-18 13:20 ID:1vfem5sA
i am trying to set up wakaba, but i am running into a problem. when i open the .pl in my browser all i get is the code o the screen.
i am thinking that my computer is not set up to execute perl.
how do i set it up to do so, i am using a mac?
314 Name: kyle : 2008-06-18 13:21 ID:1vfem5sA
i am trying to set up wakaba, but i am running into a problem. when i open the .pl in my browser all i get is the code o the screen.
i am thinking that my computer is not set up to execute perl.
how do i set it up to do so, i am using a mac?
316 Name: theming : 2008-06-30 18:29 ID:SyGDABBA
is there a guide to theming wakaba and kusaba?
318 Name: Mr Z : 2008-07-08 11:07 ID:iTL4tEeb
Hello, first thanks to the author for writing such great software.
Kareha question.
I have one working image board on my private host (Windows). I created a new dir where this board lives and extracted and setup all the files as before to give me a second board.
However when I run kareha.pl from this new dir it displays the title of my original board, says 'Thread specified does not exist.' and fails to create an index.php.
For the life of me I have no idea what's going on. I see no reason how is managing to display the title of my original board.
Before I move my original board to a separate dir I thought I'd ask for help. (Is it even possible to move a board and have its contents survive?)
319 Name: !WAHa.06x36 : 2008-07-09 04:36 ID:Heaven
You need to either delete index.html before running kareha.pl, or go to the admin page and click "Rebuild caches".
320 Name: Mr Z : 2008-07-09 13:38 ID:iTL4tEeb
Thanks, tried that and ran into a CGI error. Problem with the way my host is setup. m(_ _)m　～ギブ　アップ
321 Name: kyle : 2008-07-12 23:31 ID:1vfem5sA
i am getting this error when i open the wakaba.pl from my browser...
install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: . /System/Library/Perl/5.8.8/darwin-thread-multi-2level /System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /Library/Perl/5.8.1) at (eval 409) line 3, <FILE> line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Proxy, SQLite, Sponge.
at /Applications/xampp/xamppfiles/htdocs/xampp/wakaba.pl line 45
and i have no idea what is going on with this.
322 Name: Anonymous : 2008-07-13 15:48 ID:Fv0FaogC
>make sure the id for the different fields in the management panel are the same as the ones in the normal post form. somewhere along the lines some things got changed and waha didn't apply the changes on the management panel.
I somewhat understand what you're saying to do, but I'm not sure which part to look in. By IDs, do you mean like "Field1" or something else?
323 Name: !WAHa.06x36 : 2008-07-13 19:34 ID:Heaven
Install DBD::mysql.
325 Name: Anonymous : 2008-07-25 04:22 ID:xe/tAICs
How do I delete a post I made? I mean I know about checking my post and the delete thing at the bottom, but it wont do it without a password. And it isnt filled in already and the only password thats given when making a post is just a series of dots.
326 Name: Anonymous : 2008-07-25 04:23 ID:xe/tAICs
How do I delete a post I made? I mean I know about checking my post and the delete thing at the bottom, but it wont do it without a password. And it isnt filled in already and the only password thats given when making a post is just a series of dots.
327 Name: !WAHa.06x36 : 2008-07-25 04:40 ID:Heaven
Don't disable cookies, or start typing in a password when posting.
328 Name: Gibs : 2008-07-25 18:48 ID:v89ET997 (Image: 427x640 jpg, 96 kb)
I suddenly am having problems posting images on my site. nahc4.com
Basically if I post an image I get:
"Either this image is too big or there is no image at all. Yeah."
Im getting this on any image.. even a 30kb image. I can only post text on the site now. Does anyone have any ideas on why this is happening? I use dreamhost if that helps.
329 Name: Anonymous : 2008-07-26 07:38 ID:Heaven
>>328 do you have board-size limits set in config.pl? or a hard limit set with dreamhost?
330 Name: !WAHa.06x36 : 2008-07-27 10:59 ID:Heaven
Your server is probably blocking file uploads.
331 Name: Anonymous : 2008-07-28 08:32 ID:Heaven
>>328
I remember you... you spammed your site on every imageboard in the overchan about a year ago, right? And then it collapsed because you were runnning it on a crappy shared host with Draconian bandwidth limits.
332 Name: 超機 (moved from other thread) : 2008-07-28 15:17 ID:lpemlo1D
Is there an option (or a temporary hack) to perform secure erasure of unwanted images?
The shred is to be done regardless whether the deletion is invoked by user or admin.
Local laws are really tough on contraband.
333 Name: !WAHa.06x36 : 2008-07-28 15:20 ID:Heaven
There is no option, but if you can find a Perl module that does it for you, it'd be easy enough to search wakaba.pl for "unlink" and replace that with whatever secure deletion function you have. You could also make it call some external app to do it, using system().
334 Name: 超機 : 2008-07-30 16:09 ID:Rt5QcqQU
>>333
Thank you for your reply. The web host recommend storing everything in EncFS to make deletion unrecoverable. Not too sure about how true that concept is. I'll try to find that Perl module mentioned.
335 Name: Anonymous : 2008-08-01 01:26 ID:b5i8R9nR
my 'software error' if anybody doesn't mind helping
No ADMIN_PASS defined in the configuration at /usr/lib/perl5/5.8.7/CGI/Carp.pm line 314.
BEGIN failed--compilation aborted at config_defaults.pl line 133.
Compilation failed in require at kareha.pl line 13.
BEGIN failed--compilation aborted at kareha.pl line 13.
for each of these what do i change? like.. showing an example would be the most helpful and i know how to find all te documents for each except /usr/lib/perl5/5.8.7/CGI/Carp.pm
336 Name: Anonymous : 2008-08-01 07:02 ID:Heaven
>>335 you forgot to uncomment the lines in config.pl. remove the # from the very start of the line.
337 Name: Anonymous : 2008-08-01 13:53 ID:b5i8R9nR
>>336 there is no # and what does uncomment mean? i edited mode_* to mode_image.
now it says:
This board has not been configured yet.
Things you need to do to get the board running:
Choose what kind of board this should be, and copy the files out of the corresponding mode_image directory into the board directory.
Edit config.pl to suit your needs - remember to uncomment the lines you change.
Access kareha.pl again (or just reload this page).
also where is the board directory?
338 Name: !WAHa.06x36 : 2008-08-01 18:38 ID:Heaven
> also where is the board directory?
That's just the one where you're installing things.
340 Name: Anonymous : 2008-08-01 21:07 ID:b5i8R9nR
ok, so i was at this step >>335
BUT THEN I FUCKED SOMETHIGN UP D:
how do i get back there?
341 Name: Anonymous : 2008-08-02 17:58 ID:ZwLVKPcu
I'm setting up a board using wakaba, when I'm done I have a couple hundred images I would like to upload to start the board off with. Is there an automated way to do this so I don't have to upload them one at a time??
342 Name: Anonymous : 2008-08-07 16:40 ID:vFpjSQXT
Hi, I know it's been answered before, but the description was a bit complex for me - I tried fixing it and screwed things up completely so I'd appreciate a quick walkthrough. It's the manager post problem, where it says the spam filters have been triggered every time. I edited futaba_style.pl, but only got it to let me post but only including an image and posting as anon. Help would be much appreciated.
343 Name: Anonymous : 2008-08-09 21:26 ID:Heaven
>>341 you could make a very specific hand-crafted SQL query.
344 Name: Anonymous : 2008-08-13 05:58 ID:v37lKKto
Okay, I've got a unique problem (Like as far as I have seen while browsing here.)
I have set up Wakaba correctly SQL and Database wise (meaning that there are no server errors and everything is in the right spot)
However, I get "Software error"s now. Here's basically what it looks like:
Software error:
config.pl did not return a true value at wakaba.pl line 16.
BEGIN failed--compilation aborted at wakaba.pl line 16.
config.pl and wakaba.pl are in the same folder and directory, but from what I'm reading (I'm a newbie at perl) is that the wakaba.pl script is claiming it cannot find the config.pl script, therefore not able to draw from it using the
BEGIN { require "config.pl"; }
found on line 16.
I have found above a line containing
use lib '.';
What do I have to do? The server is configured correctly, and my config file seems to be in order, my only guess is that little line (use lib '.';) must have something to do with it. If so, then what do I have to change it to, and if not, then what might be the problem?
345 Name: !WAHa.06x36 : 2008-08-13 06:09 ID:Heaven
No, it finds the file, but it is corrupt one way or the other. You may have deleted too much when editing it?
346 Name: Sobota : 2008-08-13 14:01 ID:1KZJdnFb (Image: 402x431 png, 53 kb)
Hello, I am having a problem or two with setting up Kareha. Everything seems to be in place, but I keep getting the board not configured message. Here's how I have everything in place, am I doing something wrong here?
347 Name: Anonymous : 2008-08-14 05:14 ID:v37lKKto
I followed all the instructions included in the config file along with the setup guide provided here. Should I just try to upload a fresh config file (nonaltered) and just work my way up from there?
348 Name: !WAHa.06x36 : 2008-08-14 08:03 ID:Heaven
349 Name: Anonymous : 2008-08-19 10:31 ID:Heaven
>config.pl did not return a true value at wakaba.pl line 16.
I'm not that experienced in Perl, but doesn't that error come from the 1; not being at the end of config.pl?
350 Name: !WAHa.06x36 : 2008-08-22 04:04 ID:Heaven
Yes, probably.
351 Name: Anonymous : 2008-08-23 19:36 ID:BprmktmD
Is there an easy method of adding Adsense to the left of the input table (the one in the middle of the screen, name, link, comments, file input, etc)? It looked like I could just copy/paste the code right into the Futaba_Style file, but it didn't work. Am I missing something?
353 Name: Anonymous : 2008-08-23 20:40 ID:BprmktmD
On another note, I did add the 1 at the end of the compile lists, and it does keep the spaces in there, but still having issues having Adsense show up right next to the input area.
354 Name: Anonymous : 2008-08-23 20:53 ID:BprmktmD
No hard feelings about ads. On another note, I was trying to implement this into pearl, but I suppose I could just toss it into the html page. :p
355 Name: Anonymous : 2008-08-24 00:09 ID:Heaven
If you're going to do that, you might as well put it in templates.pl, because the first time you rebuild the cache all of that adding to the html page will vanish.
356 Name: Anonymous : 2008-08-24 01:26 ID:BprmktmD
Yup, figured that out after I re-cached lol.
I figured out how to place ads on my site, but they do not work in Firefox. I looked at other threads here, some say to turn off xhtml (set it to 0) which I did, that didn't work.
I'm looking at Wakachan, and somehow they are able to display ads in Firefox. I just don't know what they are doing differently than myself.
357 Name: Anonymous : 2008-08-24 15:26 ID:Ik3q1Abk
Ahhhh i've spent about 5 hours today trying to even start this thing!!1! So i've set up apache and got that "it works!" message in my browser..ok easy. Then i set up perl scripts - though im not sure how to test if this is working. blah blah blah i did everything and at the end it just displays code in my browser. Any useful links so that i can start over? ( except http://wakaba.c3.cx/docs/docs.html#WakabaQuickStart ) thanks
358 Name: Anonymous : 2008-08-24 18:24 ID:BprmktmD
- Set up your config file.
- Upload the contents to your FTP.
- Change your permissions, I just changed all of my .pl files to "755" in every single folder, but that's me. If your perl files do not have the proper permissions, it may not work at all.
- Open your browser to http://www.example.com/wakaba/wakaba.pl
- Should be working now.
Basically, if you just follow those steps as generic and simple as it sounds, it should be working.
On another note, I'm still waiting on some help with my Firefox issue with using ads lol. Not showing up in FF, yet shows up in IE.
359 Name: Anonymous : 2008-08-25 00:55 ID:BprmktmD
Well... I found out what the issue was after hours and hours of looking. The problem was simple. It was my htaccess file that was making it so it wouldn't show ads in Firefox. For future reference for anyone having this issue, be sure to check your htaccess file. :)
360 Name: Anonymous : 2008-08-25 05:04 ID:2PuoDa1/
Hey, i was just wondering how to make a homepage when clicking home. As it currently links to my directory...
362 Name: Anonymous : 2008-08-25 11:12 ID:Heaven
If you're seriously asking us how to make a homepage, maybe you should learn a little more about websites before putting up an imageboard...
363 Name: Anonymous : 2008-08-25 12:35 ID:k4xr5kxY
of course i know how to make a homepage in theory but was just wondering if it was somehow already created, anyway obviously not...off to dreamweaver
364 Name: moot!Ep8pui8Vw2 : 2008-08-25 19:16 ID:Heaven
LOL
365 Name: JunkBox (moved from other thread) : 2008-08-26 04:27 ID:K4vOYfq0
My webhosting server is being run by 'windows 2003 enterprise edition R2' that I can't change any permission as a user of the server. Host says it's because there's no problems running CGIs without permission setting on the OS.
But, finally what I found is this;
Software error:
Can't locate config.pl in @INC (@INC contains: . C:/Perl/site/lib C:/Perl/lib) at D:\userhome\junkbox\wakaba\wakaba.pl line 16.
BEGIN failed--compilation aborted at D:\userhome\junkbox\wakaba\wakaba.pl line 16.
For help, please send mail to this site's webmaster, giving this error message and the time and date of the error.
just as it is on here: http://hosting.ohseon.com/junkbox/wakaba/wakaba.pl
I seems like wakaba.pl couldn't read config.pl (I heard that it is usual problem on Windows that CGI programs don't read its config files.
Now, I'm waitting for the anser for this from my host.
But I' cant be so comfotable with this.
So, Anybody please help me solving this problem.
366 Name: Anonymous (moved from other thread) : 2008-08-26 04:28 ID:K4vOYfq0
Okay so far im liking wakaba alot...but because i dont know anything about html or setting up websites at all, some stuff confuses me. So i was wondering, i still don't quite understand where to put the .html file craeted from the install. Atm it's in *chan.org/b(Wakaba)/imgboard.html which links from the home. problem is if you go to *chan.org/b/ you get the directory. How would i go about just showing the page? Also a final question is once i have done this, to add a navigation at the top of imgboard.html like [ b / c / d ] how can i go about this. Thanks. Anon.
367 Name: !WAHa.06x36 : 2008-08-26 04:33 ID:K4vOYfq0
I wonder how big and blinky I will have to make that message at the top before people will actually see it? Anyway...
Windows webservers are a big mystery mostly, but you can try looking at what's been figured out in the past here: http://wakaba.c3.cx/docs/docs.html#RunningOnWindows,RunningOnIIS
Sounds like the current directory doesn't get changed to the board directory. A workaround for that should be in there.
There is no html file created from the tarball. You're definitely doing things all wrong. First, learn how to use CGI scripts. Then, try reading http://wakaba.c3.cx/docs/docs.html#WakabaQuickStart.
368 Name: Anonymous : 2008-08-26 08:07 ID:BAu9K0Wx
How can i go about making a side menu that sticks throughout a whole chan?
370 Name: Anonymous : 2008-08-27 12:41 ID:HiPLzHMQ (Image: 579x774 jpg, 56 kb)
where can i download Kareha?
371 Name: Anonymous : 2008-08-27 18:42 ID:Heaven
>>370
If you have to ask you aren't trying hard enough.
372 Post deleted by moderator.
373 Post deleted by moderator.
374 Post deleted by moderator.
375 Name: Anonymous : 2008-08-31 04:02 ID:qWzUsAgJ
So, I got wakaba up and running, except for a couple of problems:
- Thumbnails are being created, but they aren't showing up on the site itself.
- Making an "Admin Post" form the admin section posts a thread as Anonymous with no subject, and no text.
Any ideas on why these two things are happening?
376 Name: Anonymous : 2008-08-31 07:19 ID:D2fesYWh
I receive "SQL connection failure" message when running wakaba.pl script. What I doing wrong?
wakaba.sql database is already created and config.pl is changed:
use constant SQL_DBI_SOURCE => 'DBI:mysql:database=wakaba.sql;host=localhost';
377 Name: !WAHa.06x36 : 2008-08-31 18:09 ID:lpemlo1D
378 Name: Anonymous : 2008-09-03 11:23 ID:VCjtwQwI
I'm Running Kareha on my test server at home. Now that I've gotten over the quirks of Ubuntu (I hope...), it seems to work fine, except that bans don't have any effect. They show up in .htaccess, but the matching IPs can still read and post. Am I missing something painfully obvious?
379 Name: Anonymous : 2008-09-03 11:44 ID:VCjtwQwI
Aaaaand what the hey. Right after I posted that it started working properly. Color me confused.
380 Name: Anonymous : 2008-09-03 15:46 ID:PhR/X74l
I've installed Kareha but I can't see anywhere to log into with Manage as it says on the documentation.
Any help would be appreciated.
Thanks.
381 Name: Anonymous : 2008-09-03 17:42 ID:VCjtwQwI
The docs are a bit out of date; now admin.pl is where the management takes place. There's no link to it, so just type it in.
382 Name: Anonymous : 2008-09-03 19:11 ID:PhR/X74l
Thanks for the response.
I tried that but it says:
Can't locate strings_en.pl in @INC (@INC contains: . /etc/perl /usr/local/lib/perl/5.8.4 /usr/local/share/perl/5.8.4 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl /usr/local/lib/perl/5.8.3 /usr/local/share/perl/5.8.3 /usr/local/lib/perl/5.8.2 /usr/local/share/perl/5.8.2 /usr/local/lib/perl/5.8.1 /usr/local/share/perl/5.8.1 /usr/local/lib/perl/5.8.0 /usr/local/share/perl/5.8.0) at captcha.pl line 13, <FILE> line 4.
BEGIN failed--compilation aborted at captcha.pl line 13, <FILE> line 4.
Compilation failed in require at kareha.pl line 15, <FILE> line 4.
BEGIN failed--compilation aborted at kareha.pl line 15, <FILE> line 4.
Compilation failed in require at /home/www/admin.pl line 13, <FILE> line 4.
BEGIN failed--compilation aborted at /home/www/admin.pl line 13, <FILE> line 4.
Everything else seems to work fine.
383 Name: Anonymous : 2008-09-03 19:23 ID:PhR/X74l
384 Name: Anonymous : 2008-09-08 13:51 ID:WVMw6Nqe
This has probably been answered already, but I'm not sure what to search for, and reading the whole ~1200 posts in the support threads is a bit daunting.
How do you add a board description? Either below the title (http://orochi.iiichan.net/senti/ is the first example I found) or in the rule list below the message box.
386 Name: Anonymous : 2008-09-12 02:40 ID:VCjtwQwI
I know Wakaba is designed to handle it, but is there a way to get Kareha to do flood detection and control?
387 Name: Anonymous : 2008-09-14 19:01 ID:CfC1Cvf6
How do I use the german strings instead of the english ones? I want a German board.
389 Name: Anonymous : 2008-09-15 05:29 ID:8lBkvpEB
where do i have to leave the spainter.jar file for oekaki support?
390 Name: !WAHa.06x36 : 2008-09-15 06:14 ID:Heaven
Just in the base directory along with the rest of the files.
391 Name: Anonymous : 2008-09-21 17:36 ID:WeitTQAr
I'm using Yahoo! Small Business webhosting and what I keep getting after hours of trial and error is:
>Software error:
syntax error at config.pl line 173, near "1"
Compilation failed in require at /ichi/kareha.pl line 12.
BEGIN failed--compilation aborted at /ichi/kareha.pl line 12.<
Here is the line of config.pl and surrounding lines,
> 170 #);
171
172
173 1; <
And here is the line of kareha.pl, and surrounding lines,
>11 use lib '.';
12 BEGIN { require 'config.pl'; }
13 BEGIN { require 'config_defaults.pl'; } <
Please help me out.
Thanks,
Mr. Anon
393 Name: BradenFase : 2008-09-26 17:38 ID:VVSacewV
I have been looking over questions and answers and I still have not found out how to make Threads. How might I accomplish this?
394 Name: !shoBoN83/k : 2008-09-28 06:23 ID:Heaven
>>393
You won't find it because it's a terrible question.
Click "New Thread" under the thread list at the top of the page, fill in a Subject and a Comment, and press the button.
395 Post deleted by moderator.
396 Post deleted by moderator.
397 Post deleted by moderator.
398 Name: BradenFase : 2008-09-30 10:19 ID:YfEG7xxZ
I'm sorry. I just realized that I'm confusing threads with Boards. How would I make a board that I can directly link from my main page that won't get overwritten when I post?
399 Name: Anonymous : 2008-10-01 20:45 ID:nEhHvJMO
>>398 what? Just copy the entire directly of one board to another and change the config.p information (MySQL most importantly; just change the table names).
400 Name: BradenFase : 2008-10-04 08:17 ID:oh1Forn3
Hmm. Okay. I'll try that. Thank you.